LAMINATI INDUSTRIALI
RECOMPLAX D700
RECOMPLAX D700
The results of these test reports refer to the Recomplex Basic line with a high density of 700 kg/m³
| Property / Characteristic | Reference range | Value / Result |
| Density | EN 323:1993 | 662 KG/M3 |
| Swelling after 24 h of immersion in water | EN 317:1993 | 0,4 % |
| Resistance to screw pull-out at the surface | EN 320:2011 | 704 N |
| Resistance to screw pull-out at the edge | EN 320:2011 | 527 N |
| Flexural modulus of elasticity | EN 310:1993 | 683 MPa |
| Flexural strength | EN 310:1993 | 6,0 MPa |
| Tensile strength | EN 319:1993 | 1,04 MPa |
| Compressive strength | UNI EN ISO 604:2008 | 44,4 MPa |
FOR COLD STORAGE ROOMS, GRP FIBERGLASS LAMINATES ARE TESTED AND APPROVED FOR DIRECT CONTACT WITH FOOD.
The ANTIBAC additive is a silver-based technology integrated into the gelcoat
during production and distributed uniformly across the entire surface.
It helps reduce the microbial load in areas subject to frequent contact and helps prevent new colonization, providing additional protection throughout the entire life cycle of the product.
THE REASONS TO CHOOSE VETRORESINA LAMINATES
Easy to clean
Easy to sanitize and suitable for contact with food; they do not release any unwanted substances and help maintain high hygiene standards.
Protection and duration
They offer an excellent protection against corrosive agents and humidity; they’re waterproof, with low thermal expansion and long-term performance stability
Shock-Resistant
Sturdy and reliable under stress, they withstand repeated impacts and mechanical loads: ideal for high-use environments with continuous handling.
Easy to repair
In the event of accidental impacts or minor damage, they can be quickly repaired without compromising their appearance or performance.
Easy to apply
Suitable for renovating cladding and bonding to insulating substrates such as EPS, XPS, and polyurethane.
INTENDED USE
Cleanrooms: In cleanrooms, airborne particles are kept at extremely low levels, and conditions such as temperature, humidity, and airflow are strictly regulated.
The main areas of application include: the pharmaceutical industry, compounding in pharmacies, medical devices, biotechnology, the food and beverage industry, electronics manufacturing, and aerospace.
Since any surface can become a source of contamination, wall and ceiling coverings must be non-porous, easy to clean, resistant to wear and chemicals, and designed to minimize joints and areas where dust can accumulate.
In cold rooms (refrigerated or frozen storage environments), temperature-sensitive goods such as food and pharmaceuticals are preserved by maintaining a constant operating temperature within a thermally insulated and hygienic enclosure.
In this context, materials must withstand moisture, repeated washing, and thermal stress, while ensuring hygiene and long-term durability.
En el caso de las cámaras frigoríficas, los laminados de PRFV de Vetroresina han sido sometidos a pruebas y son aptos para el contacto directo con alimentos.
Caracterstícas
Densidad aparente
Disponible en diferentes densidades, espesores, colores y formatos a petición del cliente.
Alta sujeción
Resistente a la extracción de tornillos (14.311 N), garantizando una alta estabilidad de las fijaciones.
Súper resistente
Súper resistente a la compresión (262,27 GPa), diseñado para soportar elevadas cargas en zonas transitables por vehículos.
Encolable
Se puede espinar y encolar.
Mecanizable
Se puede trabajar con los equipos de carpintería más comunes, cuchillas y fresas de widia o de diamante. También es adecuado para el corte por chorro de agua
Estabilidad dimensional
Estable incluso en condiciones climáticas extremas, ambientes húmedos y cambios bruscos de temperatura. Solo un 0,02% de hinchamiento tras 24 horas de inmersión en agua.