VetroSkin GRP laminates for walls and floors

VETROSKIN GRP laminates are an ideal range of products for the construction of floors and walls: they are waterproof, easy to wash and have anti-slip properties. VetroSkin GRP panels are available in a wide range of RAL colours or even customised colours.

In general, this laminate offers:

  • Good resistance to atmospheric agents
  • Good impermeability
  • Good chemical resistance
  • Good electrical insulation
  • Good scratch resistance
  • Ease of cleaning

Recommended applications

  • Commercial vehicles: construction of floor panels
  • Buses: construction of floor panels
  • Refrigerated vehicles: construction of floor panels
  • Construction: floor panels
  • Cold rooms: construction of floor panels

Main characteristics

  • Glass fibre: all possible combinations of MAT and WOVEN ROVING. LD laminates can also be created with an anti-slip finish
  • Available in thicknesses ranging from 1.3 mm to 4.0 mm
  • Weight 1.4 – 4.5 kg/m²
  • External finish: anti-slip surface with quartz
  • Rear finish: mechanically sanded, smooth

Specific properties

  • EPA 8015D free styrene content less than 1% in weight
  • ISO 8302 thermal conductivity: 0.065 W/mK
  • UNI EN 12086:1999 resistance to water vapour: 50,000<µ<90,000
  • ISO 9352:1995 scratch resistance H18: 130 mg/100U CS10: 4.4 mg/100U
  • Operating temperature from -30°C to 70°C
  • Suitable for contact with food in accordance with Directive 2002/72/CE
  • Water absorption with internal method less than 0.5% in weight



The surfaces of Vetroresina’s laminates may have different finishes, depending on the type of application; the external surface may be glossy, matt and with or without gelcoat, whilst the internal surface may be rough, sanded or smooth. All of the laminates can be produced in various RAL colours or even in customised colours. Here are some examples of the finishes available:

  • Finishing n.1
  • Finishing n.3
  • Walnut wood finish
  • Wenge wood finish
  • Clear wood finishing
  • Finishing n.6
  • Finishing n.7
  • Finishing n.9
  • Finishing n.9
  • Finishing n.10

Packing and transport


Each roll is packaged with protective material (bubble wrap) and labelled to facilitate product traceability. It can be dispatched in various ways:

  • with 60 cm polystyrene packaging;
  • on a pallet with 60 cm or 70 cm iron supports (returnable);
  • on a custom-sized wooden pallet.

The sheets may be of various sizes and are packaged and labelled to facilitate product traceability. They may be dispatched on wooden pallets or returnable iron supports.

  • 60 cm polystyrene packaging
  • Packaging on a pallet with 60 cm or 70 cm iron supports (returnable)
  • Rolls on a custom-sized wooden pallet
  • Packaging in Sheets of various sizes

Do you need a special laminate?

We custom make laminates upon request to satisfy all of the requirements your application might have. We produce industrial laminates of different thicknesses and with different specifications using a variety of combinations of woven, glass and resins. You can click the buttons below to request your free sample and a catalogue. Do not hesitate to contact us for more information or to ask for a personalized quote.

Ask for a free sample Contact us for more information

Back to previous page