VetroSkin FRP panels for walls and floors

VETROSKIN FRP panels are an ideal range of products for the construction of floors and walls: they are waterproof, easy to wash and have anti-slip properties. VetroSkin laminates are available in a wide range of RAL colours or even customised colours.

In general, this laminate offers:

  • Good resistance to atmospheric agents
  • Good impermeability
  • Good chemical resistance
  • Good electrical insulation
  • Good scratch resistance
  • Ease of cleaning

Recommended applications

  • Commercial vehicles: construction of floor panels
  • Buses: construction of floor panels
  • Refrigerated vehicles: construction of floor panels
  • Construction: floor panels
  • Cold rooms: construction of floor panels

Main characteristics

  • Glass fibre: all possible combinations of MAT and WOVEN ROVING. LD laminates can also be created with an anti-slip finish
  • Available in thicknesses ranging from 1.3 mm to 4.0 mm
  • Weight 1.4 – 4.5 kg/m²
  • External finish: anti-slip surface with quartz
  • Rear finish: mechanically sanded, smooth

Specific properties

  • EPA 8015D free styrene content less than 1% in weight
  • ISO 8302 thermal conductivity: 0.065 W/mK
  • UNI EN 12086:1999 resistance to water vapour: 50,000<µ<90,000
  • ISO 9352:1995 scratch resistance H18: 130 mg/100U CS10: 4.4 mg/100U
  • Operating temperature from -30°C to 70°C
  • Suitable for contact with food in accordance with Directive 2002/72/CE
  • Water absorption with internal method less than 0.5% in weight



The surfaces of Vetroresina’s FRP panels may have different finishes, depending on the type of application; the external surface may be glossy, matt and with or without gelcoat, whilst the internal surface may be rough, sanded or smooth. All of the laminates can be produced in various RAL colours or even in customised colours. Here are some examples of the finishes available:

  • Clear wood finishing
  • Walnut wood finish
  • Wenge wood finishing
  • Finishing n.1
  • Finishing n.3
  • Finishing n.6
  • Finishing n.7
  • Finishing n.8
  • Finishing n.9
  • Finishing n.10

Packing and transport


Each panel is produced to a max 200’ long. They can be packaged as a single panel rolled up or it can be doubled or even tripled into a jumbo roll according to the thickness.
Each roll (or jumbo roll) is packaged with protective material (bubble wrap) and labelled to facilitate product traceability. It can be dispatched in various ways:

  • with foam EPS cradles
  • on a pallet with pyramid shape
  • on a custom-sized wooden pallet.

The sheets may be of various sizes and are packaged and labelled to facilitate product traceability. They may be dispatched on wooden pallets built to size up to 43 feet long

  • Rolls with foam EPS cradles
  • Rolls on a custom-sized wooden pallet
  • Rolls on a pallet with pyramid shape
  • Packaging in Sheets of various sizes

Do you need a special laminate?

We custom make laminates upon request to satisfy all of the requirements your application might have. We produce industrial laminates of different thicknesses and with different specifications using a variety of combinations of woven, glass and resins. You can click the buttons below to request your free sample and a catalogue. Do not hesitate to contact us for more information or to ask for a personalized quote.

Ask for a free sample Contact us for more information

Back to previous page