FRP Panels with glass fibre CSM only (chopped strand mat)

Versatile FRP panels with good mechanical and aesthetic properties. Available in a wide range of RAL colours or even customised colours.

Vetroresina Technical Sheets

In general, this laminate offers:

  • Good resistance to atmospheric agents
  • Good UV stability
  • Good impermeability
  • Good chemical resistance
  • Good electrical insulation
  • Good scratch resistance
  • Ease of cleaning

Recommended applications

Laminates with gelcoat

  • Motor homes, recreational vehicles and caravans: construction of panels for external walls, doors and lockers
  • Commercial trucks: construction of panels for internal and external walls and doors
  • Buses: construction of internal and external walls
  • Refrigerated vehicles: construction of panels for internal and external walls and doors
  • Construction: construction of panels for ventilated walls
  • Cold rooms: construction of panels for internal and external walls and doors
  • Mobile laboratories/clinics: construction of panels for internal and external walls and doors
  • Signage

Laminates without gelcoat

  • Floor panels for motor homes, caravans, refrigerated vehicles and buses.

Main characteristics

  • Glass fibre MAT, available in versions ranging from 300 g/m2 to 1600 g/m2
  • Available in thicknesses ranging from 1.1 mm to 3.0 mm with gelcoat and from 0.8 mm to 2.7 mm without gelcoat
  • Weight 1.5 – 4.3 kg/ m² with gelcoat, 1.2 – 3.9 kg/ m² without gelcoat
  • External finish: glossy or matt gelcoat, no gelcoat
  • Rear finish: sanded, mechanically sanded, calibrated, rough

Specific properties

  • EPA 8015D free styrene content less than 1% in weight
  • ISO 8302 thermal conductivity: 0.065 W/mK
  • UNI EN 12086:1999 resistance to water vapour: 50,000<µ<90,000
  • Operating temperature from -30°C to 70°C
  • Suitable for contact with food in accordance with Directive 2002/72/CE
  • Water absorption with internal method less than 0.5% in weight

Finishes

The surfaces of Vetroresina’s FRP panels may have different finishes, depending on the type of application; the external surface may be glossy, matt and with or without gelcoat, whilst the internal surface may be rough, sanded or smooth. All of the laminates can be produced in various RAL colours or even in customised colours. Here are some examples of the finishes available:

  • Clear wood finishing
  • Walnut wood finish
  • Wenge wood finishing
  • Finishing n.1
  • Finishing n.3
  • Finishing n.6
  • Finishing n.7
  • Finishing n.8
  • Finishing n.9
  • Finishing n.10

Packing and transport

Rolls

Each panel is produced to a max 200’ long. They can be packaged as a single panel rolled up or it can be doubled or even tripled into a jumbo roll according to the thickness.
Each roll (or jumbo roll) is packaged with protective material (bubble wrap) and labelled to facilitate product traceability. It can be dispatched in various ways:

  • with foam EPS cradles
  • on a pallet with pyramid shape
  • on a custom-sized wooden pallet.

Sheets
The sheets may be of various sizes and are packaged and labelled to facilitate product traceability. They may be dispatched on wooden pallets built to size up to 43 feet long


  • Rolls with foam EPS cradles
  • Rolls on a custom-sized wooden pallet
  • Rolls on a pallet with pyramid shape
  • Packaging in Sheets of various sizes

Do you need a special laminate?

We custom make laminates upon request to satisfy all of the requirements your application might have. We produce industrial laminates of different thicknesses and with different specifications using a variety of combinations of woven, glass and resins. You can click the buttons below to request your free sample and a catalogue. Do not hesitate to contact us for more information or to ask for a personalized quote.

Ask for a free sample Contact us for more information

Back to previous page